Combination Saws
An Excellent all around saw ideally suited for the small woodworking
or cabinet shops where one saw is used for all different types of
cutting. It can be used for ripping or cross cutting in solid
woods, partial board, plywood or laminated panels.
| PT
# |
Diameter |
Kerf |
Bore |
Hook |
Teeth |
| TTC
1050 |
10" |
.125 |
5/8" |
20
deg. |
50 |
| TTC
1260 |
12" |
.155 |
1" |
15
deg. |
60 |
| TTC
1470 |
14" |
.165 |
1" |
15
deg. |
70 |
Mitre Saws
Especially designed for cutting wood moulding on all types of mitre
machines and Rockwell type mitre box saws. Negative tooth designs
provides the least possible grabbing of material.
| PT
# |
Diameter |
Kerf |
Bore |
Hook |
Teeth |
| TTM
1080 |
10" |
.115 |
5/8" |
-5
deg. |
80 |
| TTM
1280 |
12" |
.125 |
5/8"or
1" |
-2
deg. |
80 |
| TTM
12100 |
12" |
.125 |
5/8"or
1" |
-5
deg. |
100 |
| TTM
1490 |
14" |
.150 |
5/8"or
1" |
-2
deg. |
90 |
Plexi -Saws
Ideally suited for cutting plastics such as plexiglass, Lucite, ABS,
lexan, and PVC pipe where melting is a problem. Good for material
thickness up to 3/8" inch.
| PT
# |
Diameter |
Kerf |
Bore |
Hook |
Teeth |
| TTP
860 |
8" |
.106 |
5/8" |
5
deg. |
60 |
| TTP
1080 |
10" |
.106 |
1" |
5
deg. |
80 |
| TTP
1280 |
12" |
.119 |
1" |
5
deg. |
80 |
Solid Surface
Saws
For the smoothes cutting on solid surface materials such as Corian,
Avonite, Fountainhead, and Gilbralter, Etc. Special clearances allow
for smoothest cut on these materials. Gives a finish which requires
no sanding or polishing.
| PT
# |
Diameter |
Kerf |
Bore |
Hook |
Teeth |
| TTS
860 |
8" |
.110 |
5/8" |
-2
deg. |
60 |
| TTS
220 |
220mm" |
.102 |
30mm" |
5
deg. |
64 |
| TTS
1080 |
10" |
.110 |
5/8" |
-2
deg. |
80 |
| TTS
1210 |
12" |
.117 |
1" |
-2
deg. |
100 |
Double Face
Laminate Saws
Smoothest cutting saw for double sided materials such as Melamine,
Korton & Veneer. Can be used on Radial, Table or panel saw.
| PT
# |
Diameter |
Kerf |
Bore |
Hook |
Teeth |
| TTD
864 |
8" |
.115 |
30mm" |
-5
deg. |
64 |
| TTD
1080 |
10" |
.115 |
5/8" |
-5
deg. |
80 |
| TTD
1210 |
12" |
.125 |
1" |
-5
deg. |
100 |
|
